Honda Pump WSP50

Manual Submersible Pump WSP50[PDF]

Features

• 1/2hp, 115V submersible trash pump
  115 Volt operation allows the pump to be plugged into a standard outlet. (GFCI is recommended).
• Solids handling up to 2.0″
  Move slurry and dirty liquids without the worry of damaging the pump.
• Ideal for draining basements, window wells, garden irrigation, decorative fountains and more
• 110 gal./min capacity
• Rated for continuous use
  Operates on continuous duty in temperatures of up to 104°, and intermittent duty up to 140°. Since this pump can be used 7 days a week, 24 hours a day, it is suitable for any application that needs to move water from one place to another on a continuous basis.
• Solids handling up to 2.0″
  Move slurry and dirty liquids without the worry of damaging the pump.
• Lightweight, durable stainless steel casing
  The pump won’t rust or corrode, minimizing costly repairs and replacement. The 304 stainless steel is an industrial grade, again minimizing damage and reducing the need for repairs.
• Automatic non-mercury float switch
  Honda submersible pumps use a mechanical float switch instead of mercury, eliminating the use of hazardous materials in the pump.
• Built in thermal reset switch
  If the pump overheats, it automatically resets itself after the pump cools down. This is designed to protect the motor from periodic overheating.
• 25 foot heavy duty cord
  Side discharge
  Side discharge submersible pumps offer higher discharge and solids handling capabilities of up to 2 inches.
• Operates fully or partially submerged
  No need to worry about the water level for the pump!
• Shielded ball bearings for added durability
  Shielded ball bearings, both top and bottom, add significantly to the longevity of the pump.
• Efficient air-insulated motor
• Oil lubricated double mechanical seals
  Oil lubricated double mechanical seals prevent damage to the seal if the pump is run dry.

Specifications

• Pump Type Submersible Trash pump
• Starting Type Automatic
• Casing Stainless Steel
• Motor (HP) 1/2
• Voltage 115
• Starting amps 34
• Running amps 8.3
• Duty Continuous
• Motor insulation Class F
• Overhead protection Built-In Thermal Automatic Reset
• Discharge Type Side
• Discharge capacity 110 gpm
• Max. head (feet) 32
• Port diameter ( inches) 2.0 FNPT
• Maximum pressure 14 psi
• Solids handling 2.0″
• Impeller Single Channel Stainless Steel
• Seals Tandem Mechanical Carbon/Ceramic-upper SIC/SIC-lower
• Cord length (feet) 25
• Cord type Heavy-Duty 115V
• Dimensions (WxH) 9.0″ x 21.5″
• Pump diameter 9.0″
• Dry weight 36 lbs.
• Residential Warranty 1 year
• Commercial Warranty 1 year

Pump Performance