LIGHTWEIGHT POLYESTER DOUBLE JACKET HOSE The choice for mission-critical firefighting performance, 6T hose is a double jacket military-grade fire hose constructed with 100% high tensile strength polyester yarn with a thermoplastic polyurethane liner for reduced weight and kink-resistance. 6T meets all the requirements of NFPA 1961 Standard and Mil Std. 24606B for potable water transfer or fuel transfer.
EXTRUDED POLYURETHANE HOSE From fuel transfer to potable water, the TM hose is engineered to military-grade quality standards to perform in the field. Smarter by design: 100% high tenacity yarn, extruded with thru-the-weave polyurethane creates a strong yet lightweight hose that also resists snaking for superior productivity.
EXTRUDED POLYURETHANE HOSE Built to last, the rugged IR hose is constructed of 100% high tenacity yarn, extruded with thru-the-weave polyurethane for incredible strength and long-lasting performance. The liner and cover meet minimum 3000 psi tensile strength.
EXTRUDED POLYURETHANE HOSE Designed to move sludge quickly and efficiently, TSX/TS is smarter by design: 100% high tenacity yarn extruded with thru-the-weave polyurethane creates a strong hose that also resists snaking for excellent flow and superior productivity.
LAY-FLAT NITRILE RUBBER HOSE Engineered for long-lasting performance in the field, AG hose features an exclusive thru-the-weave liner and nitrile rubber construction, making this rugged hose incredibly durable, with superior abrasion and puncture resistance—which is critically important for main feeder line functionality.
POLYESTER SINGLE JACKET HOSE Purpose-built for above- and below-ground mining operations, 5M mine hose is a polyester single jacket hose with a neoprene rubber liner that resists burning inherently better than hydrocarbon rubber. This hybrid design has earned 5M the Mine Safety & Health Administration (MSHA) Approval #2G-15/1 for use in mines along with non-sparking brass couplings.
POLYESTER DOUBLE JACKET HOSE When reliability counts, you can count on 8M. This premium quality neoprene rubber lined, double jacket hose is Mine Safety & Health Administration (MSHA) approved (#2G-15/1) for the extreme demands of underground firefighting. Engineered for performance, a high-quality polyester reinforced outer jacket protects an inner polyester jacket and rubber liners from wear and puncture while also helping to prevent kinking that limits flow.
POLYESTER SINGLE JACKET HOSE When the going gets tough, the tough choose 6P. Ozone-proof, heavy-gauge hose for hump racks and reels — anywhere double jacket hose will not work, 6P hose is the high pressure hose with enough muscle for industrial firefighting applications.
POLYESTER SINGLE JACKET HOSE The super-duty 5P is an excellent all-around performer: Strong, flexible and ideally suited for all exterior and interior firefighting applications, it delivers medium pressure and high-end performance at a value price point. 5P is a polyester single jacket hose with a rugged Ethylene Propylene Diene Monomer (EPDM) rubber liner that can handle most fluids including some chemicals and petroleum-based products.
POLYESTER SINGLE JACKET HOSE The industry’s featherweight champion, 3P is rugged, lightweight, strong and extremely flexible. The low pressure hose is designed for exterior and interior fire protection: 3P is an economical single jacket industrial hose made from high-strength polyester along with an Ethylene Propylene Diene Monomer (EPDM) rubber liner.
POLYURETHANE LAY-FLAT HOSE Battlefield tested and oilfield perfected, the HydroXtreme™ LDH hose is purpose-built to exceed the expectations of today’s oil and gas environments, tackling fracking and dewatering applications with ease. The one-piece construction of the hose cover, reinforcement and liner uses no adhesives.
EXTRUDED POLYURETHANE HOSE The solution for potable water transfer: Lightweight and durable, TE is manufactured of circular woven polyester fabric completely encapsulated by polyurethane elastomer that is forced thru-the-weave. It is ultra-compact and is offered in diameters up to 6" (150 mm), in typical coupled lengths of 50' or 100' or in single lengths to 660' (200 meters).
LIGHTWEIGHT 3-PLY NITRILE RUBBER HOSE FLX sets the performance standard for light duty water discharge. Conventionally extruded rubber hose can vary in thickness, creating excess bulk and weight. But FLX is different by design: The cover is inserted inside the tight-weave reinforcement, vulcanized, then turned inside-out. The liner is then inserted and the hose is vulcanized for a second time, forming a permanent bond of all three plies–guaranteeing a consistent and compact hose wall.
POLYESTER SINGLE JACKET TPU FORESTRY REEL HOSE Light in weight and strong in stature, Reel Lite is the go-to attack hose for first arrival frontline duties. Fully loaded, ready on the reel, the rubber forestry hose is purpose-built for wildland use: Reinforced with a 100% high tenacity polyester cover for exceptional durability and low drag; and a smooth TPU liner for low kink resistance—it goes wherever you need it, with complete confidence. Available in 50’ or 100’ lengths, Reel Lite is available with expansion ring or field repairable couplings.
ULTRA-RUGGED BOOSTER HOSE WITH DO-IT-ALL VERSATILITY Reeled and ready for duty, Fire Engine Booster is the rugged, reliable hose choice for knocking down fires with confidence: The multiple aramid braid reinforced red reel hose features a specially compounded Ethylene Propylene Diene Monomer (EPDM) tough cover that resists abrasion and weathering. Inside, a smooth black synthetic EPDM rubber inner tube adds flexibility and sure, high-power flow. Available with Barway or external crimped steel couplings.
CONVENTIONAL HARD RUBBER WIRE REINFORCED SUCTION HOSE Super-duty Tank-Flex hard suction hose is the ultimate workhorse with a tough synthetic Ethylene Propylene Diene Monomer (EPDM) rubber cover that resists wear on the fireground while standing up to ozone damages. It has a special wire helix and nylon fabric reinforced liner that boosts durability—it can withstand pressure if required.
CONVENTIONAL HARD RUBBER WIRE REINFORCED HARD SUCTION HOSE Portable. Rugged. Flexible. Corrugated Hard Suction Hose is purpose-built for rural fire departments: A lightweight hose with a tough synthetic Ethylene Propylene Diene Monomer (EPDM) rubber cover that resists wear on the fireground while standing up to ozone damages.
LIGHT, FLEXIBLE PVC HARD SUCTION HOSE FOR DRAFTING Accept no substitutes: Maxi-Flex is the original lightweight PVC suction-only hose. Simply built smarter, its special corrugated PVC exterior provides maximum flexibility and a smooth waterway for superior flow. Clear flexible PVC between the helix ribs allows full view of water, while distinctive black helix ribs deliver maximum UV protection.
POLYESTER DOUBLE JACKET HOSE Similar in design to 8D hose, 6D is purpose-built for the rigors of industrial firefighting but with lower operating pressures at 300 psi (2070 kPa) maximum. When the pressures are lower and the economics demand consideration, this double jacket, rubber lined hose delivers fail-proof performance with a rugged outer jacket, a smooth, steady flow and extra kink resistance.
LARGE DIAMETER NYLON DOUBLE JACKET HOSE The alternative to bulky rubber LDH hose, Triple Duty is the tough, lightweight double jacket workhorse that flat out performs. Engineered for attack, supply and relay operations, its polyurethane liner is lighter than rubber and its nylon 6.6 outer jacket, treated with exclusive Dura-Cote™ abrasion resistant coating, makes this hose incredibly durable.
HIGH PRESSURE EXTRUDED NITRILE RUBBER ATTACK/SUPPLY HOSE ATX delivers superior performance under pressure. Manufactured in a similar process as the TPX, the heavy-gauge ATX utilizes a 3-ply design where the cover and liner are extruded independently and are double vulcanized to guarantee a consistent, compact hose wall.
LARGE DIAMETER POLYURETHANE SUPPLY HOSE Kryptonite™ LDH is the ultimate fighter, delivering maximum flow and high-test durability in a high-visibility, lightweight supply line. Engineered with a rugged polyurethane thru-the-weave construction, this high-performance hose delivers superior abrasion and puncture resistance while remaining extremely light and durable, making Kryptonite the optimum choice for a service worthy supply line.
LIGHT DUTY POLYESTER SINGLE JACKET FORESTRY HOSE With grab-and-go portability and reliable performance, Quik Draw™ is the hose you want on your truck for quick response—ideal for knocking down hot spots. A small diameter, lightweight, compact single jacket hose, Quik Draw uses standard ¾" brass garden hose thread (GHT) fittings and delivers a working pressure of 150 psi (1035 kPa).
POLYESTER SINGLE JACKET FORESTRY HOSE Strong, portable and lightweight for easy transport, 7F is the dependable, all-synthetic fire hose with a polyurethane lining inside a polyester jacket that meets the USDA Forest Service Specification 5100-187 for Synthetic Lined fire hose.
POLYESTER SINGLE JACKET FORESTRY HOSE Revered for its strength and portability, 8F Fire Hose Type 187 is a lightweight, all-synthetic fire hose with a polyurethane lining inside a polyester jacket that meets the USDA Forest Service Specification 5100-187 for Synthetic Lined fire hose.
EXTRUDED NITRILE RUBBER FIRE HOSE Durable, dependable and better by design. LD is the high-end nitrile rubber covered fire hose manufactured using a unique process which permanently bonds the nylon 6.6 reinforcement to the nitrile rubber cover/liner.
EXTRUDED NITRILE RUBBER ATTACK/SUPPLY HOSE Maneuverable. Packable. Dependable. HFX’s nitrile thru-the-weave, rubber covered hose design utilizes both polyester and nylon 6.6 yarn in the reinforcing jacket. Under pressure, the polyester keeps the hose from “snaking” where the nylon allows for controlled dilation, reducing friction loss and generating higher flow rates.
3-PLY NITRILE RUBBER ATTACK/SUPPLY HOSE Lean and mean, TPX is the ultra-tough municipal rubber fire hose—but without bulk and weight. Traditionally manufactured extruded hose can vary in thickness, becoming bulky and heavy. TPX’s unique 3-ply design features a ribbed cover and smooth nitrile liner that are extruded independently. The cover is inserted inside the tight-weave polyester reinforcement, vulcanized, then turned inside-out.
LIGHTWEIGHT POLYESTER DOUBLE JACKET HOSE Versatility meets rugged dependability: 8T is the double jacket municipal-grade fire hose that incorporates a lightweight polyurethane liner for added strength, but with no added bulk to weigh you down. It meets all the requirements of NFPA 1961 Standard, and with optional Dura-Cote™ protective treatment, it is an exceptional value with industry-leading abrasion and puncture resistance, and an extended service life.
POLYESTER DOUBLE JACKET SUPPLY HOSE Rugged and quality-built to meet NFPA 1961 Standard requirements, the portable 8D is the essential municipal-grade, double jacket attack handline hose. The lightweight Ethylene Propylene Diene Monomer (EPDM) rubber liner creates consistent flow and is manufactured to a service test pressure of 400 psi to handle the toughest fireground challenges.
NYLON DOUBLE JACKET ATTACK HOSE Dura-Pak is the hose that started the industry-wide trend toward sourcing lightweight high-rise attack hose. Originally designed for backpack use, rugged Dura-Pak folds tightly for small spaces, hose beds and high-rise packs, yet it remains kink resistant and resists punctures, abrasion and petrochemicals—reasons why many departments rely on Dura-Pak for frontline attack duties.
NYLON DOUBLE JACKET ATTACK HOSE Construction: Nylon Double Jacket, EPDM Rubber Inner Liner with Rubber Backing Temperature range: -40° to 150°F (-40° to 65°C) Couplings: Aluminum NH/NST or IPT Threaded Coating: Dura-Cote™ Hose Colors: Yellow, Red, Blue, Orange, Green, Tan, White(coated)
POLYESTER DOUBLE JACKET ATTACK HOSEConstruction: Polyester Double Jacket, EPDM Rubber Inner Liner w/Rubber Backing Temperature range: -40° to 150°F (-40° to 65°C) Couplings : Aluminum NH/NST or IPT Threaded Coating: Optional Dura-Cote™ Hose Colors: Yellow, Red, Blue, Orange, Green, Tan, White(coated), White(uncoated) Stripe colors: Yellow, Red, Blue, Black, Green
POLYESTER DOUBLE JACKET ATTACK/SUPPLY HOSE Construction: Polyester Double Jacket, Extruded Polyurethane Inner Liner (thru-the-weave) Temperature range: -40° to 150°F (-40° to 65°C) Couplings: Aluminum NH/NST or IPT Threaded & Aluminum Storz Coating: Dura-Cote™ Hose Colors: Yellow, Red, Blue, Orange, Green, Tan, White(coated) Stripe colors: Yellow, Red, Blue, Black, Green