Sold out
Description
Simple and compact construction for non-abrasive liquids
General Purpose Internal gear pumps in cast iron, for clean, non-abrasive liquids. The simple and compact construction makes it a low-cost pump, often used in modified versions by OEM customers.
A close-coupled OEM model is also available. GP pumps are designed for use with IEC or NEMA flange motors.
Available with 90° angular configuration.
| Capacity Range: | Up to 50 m3/h / 225 gpm |
| Speed: | Up to 1750 rpm |
| Differential Pressure: | Up to 16 bar / 250 psi |
| Suction Lift: | Up to 0.5 bar / 15″ Hg vacuum while priming Up to 0.8 bar / 24″ Hg vacuum while pumping |
| Viscosity Range: | Up to 7500 cSt |
| Temperature: | Up to 150°C / 300° F |
