Storz x Storz Swivel: Elbow Adapter
Storz Elbow Adapter
Storz x Female Swivel Long Handle: Elbow Adapter
Short 30° elbow adapter; hard anodized and powder coated for corrosion resistance and protection
Storz x Female Swivel Rocker Lug
Storz Elbow Adapters
Short 30° elbow adapter; hard anodized and powder coated for corrosion resistance and protection
Raised Face Flange Storz Adapters: 30 DEGREE ELBOW
Flange Storz Adapters Harrington Inc, Flange adapters are available in straight and 30 degree elbows Storz fittings. All adapters are hard anodized for corrosion resistance with “Forged” Storz fittings.
Flat Face Flange Storz Adapters: 30 DEGREE ELBOW
Harrington Inc, Flange adapters are available in straight and 30 degree elbows Storz fittings. All adapters are hard anodized for corrosion resistance with “Forged” Storz fittings.
Threaded Adapter – Male Plugs
Threaded Adapter – Male Plugs
Female Long Handle Caps
Threaded Adapters
Female Rocker Lug Caps
Female Rocker Lug Caps
H57L- Female Swivel LH x Female Swivel LH Threaded Adapters
Female Swivel Long Handle
H54L- Male x Female Swivel Long Handle Threaded Adapters
NH Female Swivel Long Handle
NH Male
H54- Male x Female Swivel Rocker Lug Threaded Adapters
NH Female Swivel Rocker Lug
H53L- Female Swivel LH x Female Rigid Threaded Adapters
NH Female Rigid
NH Female Long Handle
H53- Female Swivel RL x Female Rigid Threaded Adapters
NH Female Rigid
NH Female Swivel Rocker Lug
H37- Male x Female Rigid Rocker Lug Threaded Adapters (Increaser and Reducer)
All threaded adapters are standardized with male x female descriptions. Understanding this is critical to correct part numbering
H36- Double Male Rocker Lug Threaded Adapters
NH Male Rocker-Lug
H35 – Female Swivel RL x Female Swivel RL Threaded Adapters (Double Female)
Female Swivel Rocker-Lug
30° Elbow NH Male x NH Female Swivel
- 2½” NH Male x 2½” NH Fem. Swivel
- aluminum Elbow 30° 3″ NH female swivel rocker lug x 3″ NH male
- aluminum Elbow 30° 6″ NH female swivel rocker lug x 6″ NH male
25° Elbow 4” Gate Valves with Field Adjustable Pressure Relief Valve
This LDH hydrant gate valve has the following features: slow open/close, a 25 degree elbow, and low friction loss due to a high flow waterway design.
3/4” Air Bleeder Valve
Ball Intake Valve
Full 3/4” brass air bleeder valve allows for rapid evacuation of trapped air from LDH hose lays.
Relief Valve
This Pressure Relief Valve has a hex type adjustment screw in the center of the top dial.
The top dial is in a step configuration and each step is labeled with a number from 75 PSI to 250 PSI in 25 PSI increments.
Ball Intake Valves
A low profile,12” depth ball intake valve designed for pumper intake control. Valve meets 900 PSI hydrostatic strength test. Utilizes full flow ball valve design, and has an easy to see visual indicator of ball position.
6″ Mega Flow XXL Piston Intake Valve
Intake Valve – Standard Stainless Piston Intake w/ Relief Valve
Traditional piston intake valve design used for pumper intake control. Provides the following features: a 30 degree integrated elbow, a field adjustable pressure relief valve and an air bleeder valve.
5″ Mega Flow XL Piston Intake Valve
Our newest compact design for pumper intake control allows easy maintenance. By removing only 5 bolts all moving parts can be removed in one assembly. The valve provides the following features: a low profile 30 degree integrated elbow, a field adjustable pressure relief valve and a full ¾” air bleeder.
Piston Intake Valve
Standard Stainless or Brass Piston Intake w/ Relief Valve
Traditional piston intake valve design used for pumper intake control. Provides the following features: a 30 degree integrated elbow, a field adjustable pressure relief valve and an air bleeder valve.
Storz Permanent Hydrant Adapter with Cap (Hydrant Converter)
Hydrant Storz adapters, with metal face, permanently changes main hydrant outlet from threads to Storz. Includes hard anodized adapter, metal face and cap with stainless aircraft cable and stainless steel set screw to prevent unscrewing from the hydrant.
Valve Mounting Bracket
Safely and securely mount your high quality Harrington Inc valve to your apparatus to help prevent damage from shifting in a compartment or being bounced around on the apparatus.
Storz Mounting Brackets or Mounting Plates
Storz mounting brackets or mounting plates for secure mounting of Storz appliances and adapters. Available in sizes 1.5” to 5” with quick quarter turn design.
MultiLug Coupling with three part binding
Set includes two hose couplings with three part segment bindings. A key feature is it only requires 1/4” to lock lugs in place. Couplings are cast aluminum then fine machined. East to assemble/disassemble onto LDH hose using an Allen wrench. Utilizes recessed nut and bolt design to eliminate stripping of the segments.
Post Mount for Manifolds and Hydrant Valves
Mount your high quality Harrington Inc. valve or manifold to your apparatus where it can be access quickly, easily and safely with this post mount.
Harrington “V-Groove” Shank Couplings
“V-Groove” couplings for quick and secure attachment for 8″, 10″ and 12″ hose. Made #6061-T anodized aluminum, “V-Groove” coupling collars are tapered for anti-snag.
“V-Groove” design accepts existing Groove couplings.
Segments are secured with nuts and bolts to assure there are no stripped segments. Optional hose sleeve available for easy coupling alignment.
Harrington “V-Groove” Shank Couplings 2 Bolt segments
“V-Groove” couplings for quick and secure field assembly/disassemble of 8″, 10″ and 12″ hose. Machined from #6061-T aluminum, shanks are double anodized for corrosion resistance, “V-Groove” segment collars are new 2 bolt design, collars are tapered for anti-snag.
MultiLug Blind Caps
Part Number Size HMLBC-100 10″ Multi-Lug HMLBC-120 12″ Multi-Lug
MultiLug Adapters
MultiLug Adapters are easy to assemble and include spring loaded locks for 10” and 12” connections. BSP threads allow for attaching to various coupling options and adapters.
3 Lug Storz Couplings
Domestic 3 Lug Storz couplings machined from a single piece for extruded 6061-T6 aluminum from right here in the U.S.A. Come with two 3-part segment bindings Utilizes recessed nut and bolt design to eliminate stripping of segments. Working pressures up to 240 psi.
Selectable Heavy/Medium Foam Nozzle
Air aspirating stainless steel foam nozzle with an expansion rate of 15:1 on low setting and 60:1 on medium setting. It can be adjusted via a select lever, providing added flexibility depending on the hazard.
Includes carrying handle and shut off. Flows of 60 and 125 GPM at 100 PSI
Medium Expansion Foam Nozzle
Air aspirating stainless steel tube with an expansion ratio of 60:1. Excellent for making a foam blanket over hazardous spills. Includes carrying handle and shut off. Flows 60, 95 and 125 GPM at 100 PSI. The 60 and 95 GPM have a 1.5” connection and the 125 GPM has a 2.5” connection.