Compatibility & Interchange Data
Fully interchangeable with Swagelok® and Parker A-Lok® fittings
810-7-8
600-7-8
600-7-4
200-7-2
1610-7-16
400-7-4
1210-1-8
4-dfc-2
1210-7-12
1010-7-8
Construction
ASTM material construction
316 stainless steel
Features
Double collet (ferrule) swaging action
Two positive seal points
Installation
Cut tubing squarely and clean tube end thoroughly to remove burrs.
Insert tubing into the assembly making sure the tubing seats firm against the shoulder of the body and the nut is finger tight.
Tighten the nut with a wrench 1-1/4 turns, while holding the body with a second wrench.
Safety Notes
Never connect, disconnect or remake a fitting with pressure in the system.
Make sure all fittings are properly installed.
It is not recommended to go beyond the pressure rating of the tubing. Elongation could occur in the tubing, shrinking the wall thickness and cause potential harm.
For proper sealing it is recommended that the tubing and fittings be of like material.
Always use proper thread lubricant and sealants on tapered pipe threads.
Never bleed a system by loosening a fitting.
