Safety Notes
Take the seal out and check for any cracks, tears, nicks and make sure media is not trapped in the bellows area. If any damage to the seal, replace with a new Dixon® bellow seal that is compatible with the material that is to be conveyed.
The seal is marked with directional arrows and the word ‘up’ in 4 locations on the inside diameter indicating which way to insert it into the coupler. Arrows should point at you.
Warning! Only use EZLink™ seals for this coupling system. Traditional Cam & Groove gaskets, or other types of seals are not compatible and will fail.
If there is any question about which gasket to install, call Dixon® at 800-355-1991 for a recommendation.
Take the seal out and check for any cracks, tears, nicks and make sure media is not trapped in the bellows area. If any damage to the seal, replace with a new Dixon® bellow seal that is compatible with the material that is to be conveyed.
The seal is marked with directional arrows and the word ‘up’ in 4 locations on the inside diameter indicating which way to insert it into the coupler. Arrows should point at you.
Warning! Only use EZLink™ seals for this coupling system. Traditional Cam & Groove gaskets, or other types of seals are not compatible and will fail.
If there is any question about which gasket to install, call Dixon® at 800-355-1991 for a recommendation.
