Eagle
Versatile 1 – 6 Gas Sample Draw Monitor
The EAGLE and EAGLE 2 have been two of the most popular monitors for decades, but due to the discontinuation of critical components, both instruments are no longer available. Replacement parts for the EAGLE and EAGLE 2, including sensors and filters, will continue to be available for many years.
The GX-6000, GX-8000, and SC-8000 models are excellent alternatives to the EAGLE and EAGLE 2, especially for standard 4-gas and single gas toxic versions.
EAGLE English Datasheet [PDF]
EAGLE French Datasheet [PDF]
EAGLE Spanish Datasheet [PDF]
Marine EAGLE Datasheet [PDF]
Marine EAGLE Turkish Datasheet [PDF]
Inert Gas Testing with EAGLE [PDF]
EAGLE Quick Reference Guide [PDF]
EAGLE Quick Reference Guide Spanish [PDF]
EAGLE Manual English [PDF]
EAGLE Manual Spanish [PDF]
EAGLE Manual Chinese [PDF]
Inert Gas Testing Eagle with Two Pumps Instruction Manual [PDF]
EAGLE Data Retrieval Instructions [PDF]
Suggested Alternative Products
| Features |  Eagle |
 GX-6000 |
 GX-8000 |
 SC-8000 |
|
| Sensor Capacity | 6 | 6 | 5 | 1 toxic | |
| Sample Range | 125 feet | 50 feet | 100 feet | 100 feet | |
| Combustible Ranges | PPM Leak Check | • | • | ||
| % LEL | • | • | • | ||
| % Volume | • | • | • | ||
| Battery Life | 18 hrs Ni-Cd 30 hrs Alkaline size D |
14 hrs Li-ion 8 hrs Alkaline size AA |
12 hrs Li-ion 6 hrs Alkaline size AA |
25 hrs Li-ion 18 hrs Alkaline size AA |
|
| Warranty | 2 years | 2 years | 1 year | 1 year | |
| Modes | Leak Check & Bar Hole | ||||
| Inert Mode | Combustibles | • | • | ||
| Oxygen | • | • | |||
| High Range H2S | 1,000 ppm | 1,000 ppm (RX-8000) |
|||
| PID (Photoionization) | • | ||||
| Toxic Gases | Ammonia (NH3) | 75.0 ppm | 400 ppm | 75.0 ppm | |
| Arsine (AsH3) | 0.20 ppm | 0.20 ppm | |||
| Bromine (Br2) | 1.00 ppm | 1.00 ppm | |||
| Carbon Dioxide (CO2) | 5K, 10K ppm 5, 20, 60% vol. |
10K ppm 10% volume |
|||
| Carbon Monoxide (CO) | 500 ppm | 500 ppm | 500 ppm | 300 ppm | |
| Chlorine (Cl2) | 3.00 ppm | 10.0 ppm | 3.00 ppm | ||
| Chlorine Trifluoride (CLF3) | 1.00 ppm | 1.00 ppm | |||
| Diborane (B2H6) | 0.30 ppm | 0.30 ppm | |||
| Fluorine (F2) | 5.00 ppm | 3.00 ppm | |||
| Germane (GeH4) | 0.20 ppm | 0.80 ppm | |||
| Hydrogen Bromide (HBr) | 6.00 ppm | 6.00 ppm | |||
| Hydrogen Chloride (HCl) | 15.00 ppm | 15.0 ppm | |||
| Hydrogen Cyanide (HCN) | 0.4-30 ppm | 15.0 ppm | 15.0 ppm | ||
| Hydrogen Fluoride (HF) | 0.4-9.0 ppm | 0.4-9.0 ppm | |||
| Hydrogen Iodide (HI) | 5.00 ppm | 5.00 ppm | |||
| Hydrogen Peroxide (H2O2) | 3.00 ppm | 3.00 ppm | |||
| Hydrogen Selenide (H2Se) | 0.20 ppm | 0.20 ppm | |||
| Hydrogen Sulfide (H2S) | 100 ppm | 100 ppm | 100 ppm | 30.0 ppm | |
| Nitrogen Dioxide (NO2) | 15.0 ppm | 20.0 ppm | 15.0 ppm | ||
| Nitric Oxide (NO) | 100 ppm | 100 ppm | |||
| Ozone (O3) | 1.00 ppm | 1.00 ppm | |||
| Phosphine (PH3) | 1.00 ppm | 20.0 ppm | 1.00 ppm | ||
| Phosphorus Trifluoride (PF3) | 10.0 ppm | ||||
| Silane (SiH4) | 15.0 ppm | 15.0 ppm | |||
| Sulfur Dioxide (SO2) | 6.00 ppm | 99.90 ppm | 6.00 ppm | ||
The Eagle is the most versatile portable gas detector on the market. Equipped with features that are not available on most competitive units, the EAGLE is a powerful instrument that does more than just offer the standard confined space protection for LEL, O2, H2S and CO. Detection combinations never before offered in a portable gas monitor are now available featuring the industry’s widest selection of high quality, long life and field proven sensors.
Vaporized hydrogen peroxide gas detection (VHP) in fumigation disinfection of medical facilities, pharmaceutical environments, including cleanrooms, production filling lines, and chemical fogging for the food industry.
Unique EAGLE features include PPM or LEL hydrocarbon detection at the push of a button; infrared sensors for CO2, methane or hydrocarbons in LEL and % volume ranges; a methane elimination switch for environmental applications, a long list of super toxic gases and measurable ranges, and dual hydrophobic filters that increases its water resistant performance. The EAGLE has a strong internal pump with a low flow auto shut off and alarm, which can draw samples from up to 125 feet even with the dual hydrophobic filters in place. This allows for quick response and recovery from distant sampling locations. The EAGLE will continuously operate for over 30 hours on alkaline batteries or 18 hours on Ni-Cads. A variety of accessories are also available to help satisfy almost any application such as long sample hoses, special float probes for tank testing, continuous operation adapters, remote alarms and strobes, and dilution fittings, just to name a few.
Specifications
| Enclosure | Weather resistant, chemical resistant, RF/EMI coated high impact polycarbonate polyester blend. Can be set in rain or into 2.5 inches of water without damage. Ergonomically balanced with rugged top mounted handle. |
| Dimensions | 10.5″ long x 5.9″ x 7″ tall |
| Weight | 5 lbs. |
| Detection Principle | Catalytic combustion, electrochemical cell, galvanic cell, and infrared. |
| Sensor Life | 2 years under normal conditions. |
| Sampling Method | Powerful, long-life pump (over 6,000 hours) can draw samples over 125 feet. Flow rate approximately 2.0 SCFH. |
| Display | 4 x 20 LCD readout with backlighting. Viewed through window in case top. Displays readings & status of all channels simultaneously. |
| Alarms | 2 alarms per channel plus TWA and STEL alarms. Fully adjustable for levels, latching or self reset and silenceable. |
| Alarm Method | Buzzer 85dB at 30 cm, dual high intensity LED’s, and blinking display. |
| Controls | 6 external push buttons for operation, demand zero, and autocalibration. Buttons also access LEL/ppm, alarm silence, peak hold, TWA /STEL values, battery status and many other features. |
| Continuous Operating Hours | 30 hours minimum using alkaline batteries, or 18 hours using Ni-Cads. |
| Power Source | Size D batteries, 4 alkaline or Ni-Cad. Charger has alkaline recognition to prevent battery damage if alkalines are charged. |
| Operating Temp. & Humidity | -10°C to 40°C (14°F to 104°F), 0 to 95% RH, non-condensing. |
| Indication Accuracy | Maximum variance +/- 5% of full scale. |
| Response Time | 30 seconds to 90% (for most gases). |
| Safety Design | Intrinsically Safe, Class I, Division 1, Groups A, B, C and D. CSA / NRTL & UL Classified (most versions). |
| Standard Accessories | Shoulder strap, alkaline batteries, hydrophobic probe, and 5 foot hose (for special toxic gas versions, shorter teflon hose used without probe). |
| Optional Accessories | • Remote alarm • Dilution fitting (50/50) • Ni-Cad batteries • Battery charger, 115 VAC, 220 VAC, or 12 VDC • Continuous operation adapter, 115 VAC or 12 VDC • Extra loud buzzer • Extension probes • External hydrophobic filter |
| Warranty | One year material and workmanship |
Gases
| Gas | Measuring Range | Accuracy * Which ever is greater |
| Standard Confined Space Gases | ||
| Hydrocarbons (CH4, std) | 0 – 100% LEL | ± 5% of reading or ± 2% LEL (*) |
| 0 – 50,000 ppm | ± 50 ppm or ± 10% of reading (*) | |
| Oxygen (O2) | 0 – 40% Vol. | ± 0.5% O2 |
| Carbon Monoxide (CO) | 0 – 500 ppm | ± 5% of reading or ± 5 ppm CO (*) |
| Hydrogen Sulfide (H2S) | 0 – 100 ppm | ± 5% of reading or ± 2 ppm H2S (*) |
| Super Toxics and Other Gases | ||
| Ammonia (NH3) | 0 – 75 ppm | ± 10% of reading or ± 5% of full scale (*) |
| Arsine (AsH3) | 0 – 1 ppm, 0 – 200 ppb | |
| Chlorine (Cl2) | 0 – 3 ppm | |
| Chlorine Dioxide (ClO2) | 0 – 1 ppm | |
| Fluorine (F2) | 0 – 3 ppm | |
| Hydrogen Fluoride (HF) | 0.4 – 9 ppm | |
| Hydrogen Chloride (HCl) | 0 – 15 ppm | |
| Hydrogen Cyanide (HCN) | 0.4 – 30 ppm | |
| Hydrogen Peroxide (H2O2) | 0 – 3 ppm | |
| Hydrogen Selenide (H2Se) | 0 – 0.2 ppm | |
| Hydrogen Sulfide (H2S) | 0 – 1 ppm, 0 – 30 ppm | |
| Nitrogen Dioxide (NO2) | 0 – 15 ppm | |
| Ozone (O3) | 0 – 1 ppm | |
| Nitric Oxide (NO) | 0 – 100 ppm | |
| Phosphine (PH3) | 0 – 1 ppm | |
| Silane (SiH4) | 0 – 15 ppm | |
| Sulfur Dioxide (SO2) | 0 – 6 ppm | |
| IR Sensors | ||
| Carbon Dioxide (CO2) (IR Sensor) | 0 – 5,000 ppm, 0 – 10,000 ppm, 0 – 5% Vol. 0 – 20% Vol. 0 – 60% Vol. | ± 5% of reading or ± 2% of full scale (*) |
| Methane (CH4) (IR Sensor) | 0 – 100% LEL, 0 – 100% Vol. | |
| Isobutane (iC4H10) (IR Sensor) | 0 – 100% LEL, 0 – 30% Vol. | |
