| Model | FP-301 |
| Detection principle | Photoelectric photometry method using tape cassette |
| Detection tape | Plug in cassette |
| Target Gas and Detection range | Arsine: 0-15 ppb Hydrogen Selenium: 0-200 ppb |
| Sampling method | Internal sample drawing pump |
| Gas concentration display | Digital display by LCD |
| Alarm Indication | Warning and alarm with audible and visual indications |
| Alarm relay output | Common contact for each WARNING, ALARM and trouble, latched mode, rated 0.5A at 125VAC (resistive load) |
| Alarm display | Gas Alarm: Yellow warning light, Red alarm light and buzzer sound Trouble Alarm: Flashing green light |
| Self diagnosis | Sensor failure, low flow, tape cut, tape end notice, tape end, tape set failure, system trouble |
| External output signal | 4-20mA (300 Ω at maximum load resistance) |
| Operating temperature & humidity | 41-95°F 5~35°C30~90% RH (non condensing) |
| Power supply & power | 24VDC +/- 10% for panel mounting 100 VAC-220VAC+/-10%, 50/60 Hz (desktop type) Please specify the mounting type and power supply when ordering |
| Dimensions & weight | Panel mounting: Approx. 6.5″(W) x 6.5″(H) x 10.3″(D) Approx. 14.33lb Desktop: Approx. 6.5″(W) x 7.8″(H) x 10.4″(D) Approx. 12.125lb |
RKI FP-301 Arsine AsH3 and Hydrogen Selenide H2Se Detector
High Sensitivity Gas Monitor
Features
- PPB detection for ArsineAsH3 and Hydrogen Selenide H2Se
- PPB or PPM digital display
- Easily transportable
- Panel mounting configuration available
- Cassette tape remainder display included
- Self-diagnostic functions
- Two alarm levels
- Interference – free detection
- Ideal for detecting new ACGIH’s TLV level for Arsine
Description
Datasheet [PDF]
RKI’s paper tape monitors utilize highly sensitive colorimetric tapes to achieve interference free detection at low PPB and PPM levels of a wide variety of gases. The FP-301 is equipped with an easily replaceable tape that is highly specific to Arsine AsH3 and Hydrogen Selenide H2Se. This model is equipped with a digital display showing the type of gas and concentration in ppb. The FP-301 will also display remaining tape life as well as an end of tape alarm.
The FP-301 has audible and visual alarms, as well as alarm relay contacts and 4-20mA output. A unique “tape saver mode” extends tape life in applications where high background gas levels may be present.
The FP-301 meets and exceeds OSHA and NIOSH compliance requirements, and does not respond to interfering gases (hydrocarbons, alcohols, solvents, CO, etc.) that may be present in industrial/manufacturing environments. FP 301
Applications
- Detecting of uncaptured gas from scrubber
- Environmental monitroing for semiconductor fabs
