24-HD-T-EP Tall Explosion Proof Motor
The 24-HD-T-EP is the identical design to the original 24-HD with an additional 2.5′ of height.
PRODUCT CHARACTERISTICS
The 24-HD-T-EP is the identical design to the original 24-HD with an additional 2.5′ of height. An extended vertical reach for the 24-HD was needed in the Oil & Gas industry in order to ventilate above raised platforms from ground level. At just over 1.5 m, the Tall Boy features a wide foot print for surprise stability and its large 10″ wheels allow for easy mobility.
Watch a 24HD In action
| BLADE |
24″ Diameter Assembly Made Up of 8 Composite Blades, Bolted to a Center Hub |
|---|---|
| Part No. | |
| Weight | |
| DIMENSIONS W X D X H | |
| CFM | |
| HP | |
| Dia. | |
| Model No. | |
| TILT |
Manual 8 Position Fan/Motor Tilt at 10 degree increments: Max +30 to -50 degrees |
| FRAME |
Welded 1″ Square Steel Tubing with Powder-Coat Finish |
| MAXIMUM CORD LENGTH |
14 GA. – 60′ 12 GA. – 95′ 10 GA. – 150′ 8 GA. – 240′ 6 GA. – 380′ |
| EXPLOSION PROOF MOTOR OPTION |
Rated for Class I (Group C & D) and Class II (Group F & G) Environments Includes Explosion Proof Switch |
| MOTOR/DRIVE |
1.0 HP Single Speed Electric TEFC Motor Designed to run on 15 AMP Circuit – Actual Draw Approx. 14 AMP Approx. Amp Draw -14 AMP |
| GRILL |
Continuous Circular Wound External-Weld Steel Wire with 8 Tie Points for additional Safety – Steel is Zinc-Plated with a Clear Chromate Finish |
| BUSHING |
Keyed Shaft and Set or Cap Screws |
| SHROUD |
Rolled Steel with Powder-Coat Finish |
| Options |
