Applications
Designed for use with liquids, consult Dixon for specific recommendations
Safety Notes
Under no circumstances should cam and groove couplings be used for compressed air or steam service!
Final weld preparation, as with all weld fittings, is the responsibility of the welder.
Line drawings are for reference only. Consult Dixon for specific dimensions.
Pressure rating recommendations are based on the use of mating Dixon fittings at ambient temperature 70°F (21°C) with a standard Nitrile Rubber seal installed. For use at elevated temperature or other unusual operating conditions, consult Dixon.
Under no circumstances should cam and groove couplings be used for compressed air or steam service!
Final weld preparation, as with all weld fittings, is the responsibility of the welder.
Line drawings are for reference only. Consult Dixon for specific dimensions.
Pressure rating recommendations are based on the use of mating Dixon fittings at ambient temperature 70°F (21°C) with a standard Nitrile Rubber seal installed. For use at elevated temperature or other unusual operating conditions, consult Dixon.
Dixon and Boss-Lock cam and groove couplings do not interchange in the 8″ size.
Specifications
Produced to interchange with all product produced to Commercial Item Description A-A-59326D
No standard exists for the 5″ fittings, and generally does not interchange with other manufacturers.
No standard exists for the 8″ fittings, and generally does not interchange with other manufacturers.
