Applications
Specifically designed for liquid terminal operation on batch loading and overfill protection, tank cars, tank trucks, marine barges, suitable for open and close dome
Specifically designed for liquid terminal operation on batch loading and overfill protection, unloading, tank cars, tank trucks, marine barges, suitable for open and close dome
Available Options
24″, 36″, 48″ and 60″ probe lengths standard, other lengths available
Optional opto-isolated solid state contact output
24″, 36″, 48″ and 60″ probe lengths standard, other lengths available
Construction
Wetted materials: 316 stainless steel, PTFE standard, other materials available
Features
Totally self-contained; no wires, tubing or external power
Rugged weather and corrosion resistant construction
No moving parts, tip sensitive phase shift™ digital capacitance sensor for conductive and non-conductive fluid
Requires no calibration or adjustment
Operates up to 2500 hours on a single 9V alkaline battery
Adjustable insertion length through a standard 1/2″ NPT fitting
High intensity audible and flashing visual outputs
Full, hard graduated laser engraved rod
Fail safe continuous battery monitor goes to alarm state on low battery
Activation point 1/4″ above liquid surface
Battery current drain <0.23 ma during standby; <50 ma in alarm state
Horn intensity 101 dB at 2′
Light output 3 each 3000 mcd high intensity flashing LED’s
Capacitance Phase Shift Probe
1/2 NPT gland standard
Minimum dielectric constant 1.8
No moving parts, tip sensitive phase shift™ digital capacitance sensor for conductive and nonconductive fluid, conductivity sensor with integral splash shield
A100 operates up to 2500 hours n a single 9V alkaline battery
Specifications
Intrinsically safe design per ANSI/UL913 Class I, Div I Groups A, B, C and D Hazardous Areas
Intrinsically safe design per ANSI/UL913 Class I, Div I Groups A, B, C and D Hazardous Areas
Minimum dielectric constant 1.7
Temperature range: capacitance probe: -14°F to 250°F (-26°C to 121°C)
Compatible with any liquid or dry bulk material with a dielectric constant of 1.7 or greater
Pressure rating on standard unit: 50 PSI, consult Dixon® for applications up to 300 PSI
