Single Pin Heavy Duty Clamp with Cross Hole Wing Nut

Description

Note

Wingnut tightened to 25 in. lb. of torque

Safety Notes

Service pressure ratings are based on the following parameters: matching elastomer gaskets and weld ferrules properly aligned and assembled with the clamps tightened to required torques. Tests are done hydostatically with no water hammer or shock loads.

All ratings shown are dependent upon related components within the system and proper installation.

Additional information

Tube OD	1" to 1-1/2" , 1/2" to 3/4" , 2-1/2" , 2" , 3" , 4" , 5" , 6" , 8"
Optional Package/Box Quantity	10 , 150 , 20 , 25 , 30 , 35 , 50 , 60
Material	304 Stainless Steel
Pressure Rating	100 PSI at 70°F 50 PSI at 250°F , 150 PSI at 70°F 75 PSI at 250°F , 1500 PSI at 70°F 1200 PSI at 250°F , 225 PSI at 70°F 100 PSI at 250°F , 300 PSI at 70°F 150 PSI at 250°F , 350 PSI at 70°F 175 PSI at 250°F , 400 PSI at 70°F 200 PSI at 250°F , 450 PSI at 70°F 250 PSI at 250°F , 500 PSI at 70°F 300 PSI at 250°F

Document Attachments

Single Pin Heavy Duty Clamp with Cross Hole Wing Nut

Note

Safety Notes

Pinch-On Double Ear Clamp

WaveSeal Clamp

Boss® Clamp 2 Bolt Type, 2 Gripping Fingers

Holedall® Standard Ferrule

Boss® Clamp 4 Bolt Type, 2 Gripping Fingers

Holedall Petroleum Ferrule

Dixon Roll-Over Type Smooth ID Band Clamp

Band & Buckle Clamp Set Screw Buckles

About Us

Contact Info

Google Map

Single Pin Heavy Duty Clamp with Cross Hole Wing Nut

Note

Safety Notes

Related products

About Us

Contact Info

Google Map