Honda Pump WDP30

Manual Diaphragm Pump WDP30[PDF]

Features

• Ideally suited for muddy water, sludge, or any water with a high percentage of solids
  Honda’s WDP30 diaphragm pump is a positive displacement pumps that can pump thick sludge or water containing large solids. Instead of an impeller and a volute, diaphragm pumps use a neoprene diaphragm. The WDP30 offers an exceptional value for construction, industrial, and agricultural applications.
• Perfect when low volume, dry run capability is required
  Because it can run without water, the WDP30 is perfect for areas with slow seepage. For example, work sites where groundwater is slowly seeping in.
• 3 year residential/commercial warranty
  You can rest easy, knowing your pump is covered from top to bottom for 3 full years.
• Special “rock channel” prevents case damage
  Allows large solids and high amounts of sediment to pass through the pump without harming the components
• Protected by Honda Oil Alert®
  Protects the pump by shutting the engine off when low oil is detected.
• Die cast aluminum case
• Dry self priming for convenient quick starts.
• Convenient carrying handles
• Standard 2 3/8″ steel strainer
• Handles solids up to 2.4″
  With 3″ ports, the WDP30 can easily pass solids up to 2.4″.
• Easy starting Honda OHV commercial engine
  The durable Honda GX series commercial grade engine is easy starting and provides ample power for the toughest conditions.
• 80 gal./min capacity
• Spring protected connecting rod
  Protects the pump against damage
• Wheel kit standard
• Removable priming plug allows suction head to be increased.
• Air cushion chamber to reduce pulsation in the suction line
• NPT suction and delivery ports for easy hose connections

Specifications

• Engine GX120
• Displacement 118 cc
• Bore and stroke 2.4″ x 1.7″
• Compression Ratio 8.5:1
• Oil Alert Std
• Pump Type Diaphragm Self-priming
• Volute N/A
• Impeller N/A
• Mechanical Seal N/A
• Priming time 20 sec. at 20.0 ft.
• Drive system Direct
• Discharge capacity 80 gals./min.
• Suction port diameter 3″ NPT
• Discharge port diameter 3″ NPT
• Total head lift 50 ft.
• Suction head lift 16 ft dry, 24 ft.primed
• Maximum pressure N/A
• Solids handling 2.4″
• Fuel Capacity 0.53 gal
• Run Time @ Max Discharge N/A
• Dimensions (LxWxH) 31.5″ x 30.5″ x 25.7″ (with handlebar over engine)
• Dry weight 163 lbs.
• Strainer Part # W70-2903-00
• Residential Warranty 3 years
• Commercial Warranty 3 years

Pump Performance