Honda Pump WMP20

  • 2″ multi-purpose pump
  • Designed for pumping industrial and agricultural chemicals
  • 220 gal./min capacity
  • Thermoplastic pump housing for chemical capability
Description

Manual Multi-Purpose Pump WMP20[PDF]

Features

  • Designed for pumping industrial and agricultural chemicals
    See the applications tab for approved chemical applications.
  • Easy starting Honda OHV commercial engine
    The durable Honda GX series commercial grade engine is easy starting and provides ample power for the toughest conditions.
  • Thermoplastic components for chemical capability
    The WMP20’s reinforced thermoplastic housing, volute & impeller improve chemical resistance.
  • Isolation mounted engine and pump
    High performance mounts minimize vibration, keeping the pump from “walking” away or “burying” itself in soft soil conditions. The reduced vibration also reduces wear on components, increasing the pump’s durability.
  • EPDM seals for chemical resistance
    The WMP20 features EPDM seals, a type of rubber material that is designed to be compatible with a wide range of chemicals.
  • 220 gal./min capacity
  • Heavy duty full frame protection
    Protects the pump, while offering a convenient tie down location for transport.
  • Protected by Honda Oil Alert®
    Protects the pump by shutting the engine off when low oil is detected.
  • 3 year residential/commercial warranty
    You can rest easy, knowing your pump is covered from top to bottom for 3 full years.

Specifications

  • Engine GX160
  • Displacement 163cc
  • Bore and stroke 2.7″ x 1.8″
  • Compression Ratio 9.0:1
  • Oil Alert Std
  • Pump Type Multi-purpose Centrifugal Self-priming
  • Volute Rigid Mounted Fiberglass reinforced polyester
  • Impeller Fiberglass reinforced polyester
  • Mechanical Seal (Pump case / impeller) Carbon/Ceramic
  • Priming time 65 sec. @ 16.4 ft.
  • Drive system Direct
  • Discharge capacity 220 gals./min.
  • Suction port diameter 2″ NPT
  • Discharge port diameter 2″ NPT
  • Total head lift 102 ft.
  • Suction head lift 26 ft.
  • Maximum pressure 44 psi
  • Solids handling N/A
  • Dimensions (LxWxH) 20.5″ x 15.7″ x 17.7″
  • Dry weight 57 lb.
  • Fuel Capacity 0.82 gal
  • Run Time @ Max Discharge 1.5 hr
  • Strainer Part # 78325-YE0-003
  • Residential Warranty 3 years
  • Commercial Warranty 3 years

Pump Performance