Chemguard TF Foam Discharge Head
The brass TF foam discharge head is designed to discharge foam in a spray pattern. These air-aspirated directional spray heads can be mounted in any position between horizontal to vertical.
The head attaches to foam solution piping with the 1/2-14 NPT male threaded connector. Maximum diameter is 3 3/4 in. (95 mm) and height is 4 1/2 in. (114 mm).
TDS [PDF]
The brass TF foam discharge head is designed to discharge foam in a spray pattern. These air-aspirated directional spray heads can be mounted in any position between horizontal to vertical.
The head attaches to foam solution piping with the 1/2-14 NPT male threaded connector. Maximum diameter is 3 3/4 in. (95 mm) and height is 4 1/2 in. (114 mm).
Application
Depending on the hazard, various low expansion foam agents, such as protein, fluoroprotein, AFFF, Alcohol Resistant AFFF, and Class A foam concentrates can be used with the TF discharge head. Typical applications include dike protection, pump pit areas, and as ground sweep nozzles for truck loading racks.
Approvals and Listings
The TF foam discharge head is Underwriters Laboratories (UL) Listed with various foam agents.
