VULCAN® LED ATEX LANTERN

ATEX Rated, Industrial and Fire Carry Lantern

ATEX-rated for Zone 2 gas and Zone 22 dust locations. This rechargeable LED lantern is lightweight, weighing only 875 grams. Its tight beam is optimal for firefighting applications.

• ATEX-rated for Category 3 (Zones 2 and 22) locations. IECEx-rated for Group IIC and IIIC locations. For use in places with an explosive atmosphere (other than mines susceptible to firedamp) that is not likely to occur in normal operation, but if it does, only occurs for short periods. It has a maximum surface temperature of <120°C Gas, 65°C Dust.
• C4^® LED with high, low and blink modes:
  • High for a bright, far-reaching beam: 180 lumens; 100,000 candela; 632m beam; runs 3.5 hours
  • Low for a less intense beam and longer run time: 70 lumens; 40,000 candela; 400m beam; runs 7.5 hours
  • Blink for signaling: runs 5.5 hours
• Deep-dish parabolic reflector produces a tight beam with optimum peripheral illumination to aid in navigation
• Optimized electronics provide regulated intensity
• Lightweight lithium ion battery recharge in 5 hours
• Dual-direction toggle switch is easy to use with gloved hands
• Reinforced D-Rings
• IP66; dust tight and water-resistant; 2m impact resistance tested
• Operating temperature: -20°F to 130°F. (To maintain hazardous locations rating: -20°C to 35°C)
• Two models: Standard System with AC/DC and Vehicle Mount with 12V DC direct wire charging rack; both models include a quick release buckle strap
  • Quick-release strap works like a seatbelt buckle for fast and easy release/connection of shoulder straps
• Fits all the existing Vulcan series charging bases/racks already in service
• Uses the same battery as the previous model ATEX Fire Vulcan LED
• 19.76 cm (7.78”); 875 grams (1.93 lbs)
• Serialized for positive identification
• Limited lifetime warranty
• Assembled in USA

PRODUCT SPECIFICATIONS