StaticSorb® Coveralls from Lakeland’s Woven Products Division are quality garments designed to control electrostatic contamination. They are worn in food or paint rooms, throughout the electronics assembly and pharmaceutical industries, and in locations where static electricity build-up may cause costly defects. StaticSorb® Coveralls provide a non-linting barrier between contaminants and clean rooms.
Style Number L620
- Button front
- Single chest pocket
- Two lower pockets
- Side entry slits
Sizes: S, M, L, XL, XXL
Static Sorb® Physical Data
| Static Sorb® C3 | Static Sorb® AMD Stripe | |
| Weave | Plain | Plain |
| Yarn Type | High Density | Microdenier |
| Weight (ounces per square yard) | 2.8 | 3.7 |
Static Sorb® Test Data
| Static Sorb® C3 | Static Sorb® AMD Stripe | |
| Paint Bleed Through | <0.2 | 0.2 |
| Paint Gain in Grams (30 sec) | <0.3 | <0.3 |
| Air Permeability / ASTM D-737 (Cubic Feet per Minute/Square Foot) |
>=2.5 | >=11 |
| Particle Filtration Efficiency / IES RP-CC-003.2 (Percent Removal at 5 Microns) |
>=90% | >=90% |
| Moisture Vapor Transmission Rate / ASTM E-96 (Grams / Meter2/24 Hours at 73°F, 50% RH) |
>1500 | >1500 |
| Roughing and Pilling / ASTM D3512 Modified (Subjective Rating Scale 0.5 – 5.0) |
>=4.0 | >=4.0 |
| Static Decay Time (seconds – positive charge) (Federal Standard 101C/4046 Charge Decay Time in Seconds measures how fast a charge will dissipate from a fabric) |
>0.01 | >0.01 |
| Static Decay Time (seconds – negative charge) (Federal Standard 101C/4046 Charge Decay Time in Seconds measures how fast a charge will dissipate from a fabric) |
>0.01 | >0.01 |
