Sold out
Low Pressure Hose
Low-pressure, textile reinforced applications including petroleum and water-based fluids for use as power steering return, lube lines and air lines. Not for brake applications.
Description
Application Low-pressure, textile reinforced applications including petroleum and water-based fluids for use as power steering return, lube lines and air lines. Not for brake applications.
Reinforcement One textile braid
Max. Working Pressure 300-1250 psi
Products
- SR6 (SAE 100R6)
- Inner Tube Nitrile
- Cover Black polychloroprene
- Temperature Range -40°F to 212°F (-40°C to 100°C)
- Fitting Reference All fittings compatible with the SR6 hose family are listed in Section 5 (starting on page 187) of the catalog.
- Branding (example) Continental ContiTech SR6-03 SAE 100R6 R6 3/16″ (DN05) W.P. 500 psi (3.4 MPa)
- SR3 (SAE 100R3)
- Inner Tube CR (Polychloroprene)
- Reinforcement Two textile braids
- Cover Black polychloroprene
- Temperature Range -40°F to 212°F (-40°C to 100°C)
- Fitting Reference All fittings compatible with the SR3 hose family are listed in Section5 (starting on page 187) of the catalog.
- Branding (example) Continental ContiTech SR3-04 SAE 100R3 R3 1/4″ (DN06) W.P. 1250 psi (8.6 MPa) MSHA 2G-IC-14C/30
- HR6 (SAE 100R6)
- Inner Tube Nitrile
- Cover Black CSM (Chlorosulphonated Polyethylene)
- Temperature Range -40°F to 275°F (-40°C to 135°C)
- Fitting Reference All fittings compatible with the HR6 hose family are listed in Section 5 (starting on page 187) of the catalog.
- Branding (example) Continental ContiTech HR6-04 SAE 100R6/EN 854 R6 (High Temp) 1/4″ (DN06) W.P. 400 psi (2.8 MPa)
- HR4 (SAE 100R4)
- Application Low-pressure, high temperature return line or suction line for petroleum- and water-based hydraulic fluids. Vacuum rating 25 in Hg. HR4 has half the bend radius of typical SAE 100R4.
- Inner Tube Nitrile
- Reinforcement Spiral-plied synthetic fabric with wire helix
- Cover Black polychloroprene
- Temperature Range -40°F to 275°F (-40°C to 135°C)
- Fitting Reference All fittings compatible with the HR4 hose family are listed in Section5 (starting on page 187) of the catalog. Note: No Continental ContiTech fitting recommendation on HR4-48 and HR4-64 hose sizes.
- Branding (example) Continental ContiTech HR4-16 SAE 100R4 1″ (25mm) WP 325 psi (2.24 MPa) MSHA IC- 233/0
