Bauer Compressors Legacy Plus™

Breathing Air Catalog [PDF]

The BAUER LEGACY™ Series is built in the rugged and proven VERTECON® Frame, and offers back to basics simplicity while still incorporating PLC Control! Replacing the HMI/Touchscreen is a simple, illuminated On/Off Switch and a set of flashing indicator lamps; the lamps flash a code representing fault warnings and shutdowns.

Matched with the BAUER LEGACY™ Compressor is the CFS5.5®-2/PLUS: a two-position fully NFPA Compliant (1901 & 1989) SCBA/ SCUBA Fill Station. The CFS5.5®-2/PLUS includes an attractive, ergonomically designed, two bank cascade fill control panel, as well as an integral air storage system consisting of two 6000 PSIG UN/ISO air storage cylinders. The LEGACY PLUS™ System can be further enhanced by the substitution of ASME air storage cylinders in lieu of UN/ISO and the addition of the optional regulated remote fill outlet, including a high-pressure hose reel and 100 feet of 6000 psig high-pressure hose!

SYSTEM FOOTPRINT

LEGACY COMPRESSOR MODULE

Dimentions L x W x H inches (mm)

• 44″ x 33″ x 54″ (1118 mm x 838 mm x 1372 mm)

Weight pounds (kg)

• 630-1075 lbs (286-488 kg)

FILL STATION MODULE

Dimentions L x W x H inches (mm)

• 35” x 37” x 70” (737 mm x 940 mm x 1778 mm)

Weight pounds (kg)

• 1200-1600 lbs (544-726 kg)

AVAILABLE ACCESSORIES (FACTORY INSTALLED)

COMPRESSOR MODULE

• CO Monitor
• Air storage and containment fill stations allow for customization to meet specific requirements

AVAILABLE ACCESSORIES (FACTORY INSTALLED)

FILL STATION MODULE

• Regulated (adjustable) remote fill hose connection to include high pressure hose reel and 100 feet of 6000 psig rated high pressure hose (wall mount)
• ASME air storage cylinders in lieu of standard UN bottles
• Regulated (adjustable) panel mounted remote fill hose connection
• Dual Fill/2 position
• Tri Fill/2 position

STANDARD SCOPE OF SUPPLY – FILL STATION MODULE

• Two (2) bank dual function cascade controls
• Two (2) UN code stamped air cylinders installed in an integral rack
• 3-way selector valve
• NFPA 1901 2016 edition compliant 2 position containment fill station accommodates SCBA or SCUBA cylinders up to 31” overall length
• Aesthetically pleasing cabinetry
• Will work with any brand compressor

STANDARD SCOPE OF SUPPLY –  COMPRESSOR MODULE

• Open vertical configuration made of formed sheet and plate goods provides a firm foundation for all pressure bearing components
• Unsurpassed maintenance accessibility.  No hand tools are required for normal maintenance checks and fluid level confirmation
• BAUER PLC based controller
• Self-adjusting drive belt tensioner
• NEMA 4 rated electrical enclosure with UL® listed control panel
• All wiring harnesses incorporated within a corrugated loom with number coding for easy system diagnosis
• Emergency stop push button
• .049 wall thickness stainless steel tubing throughout, no cheap plastic tubing
• Rugged powder coat finish
• Automatic condensate drain system
• Locally mounted interstage pressure gauges
• Compressor on/off, final pressure, oil pressure, high temperature shutdown
• Motor overload indication
• Final separator counter with shutdown and operator indication

TECHNICAL DATA

1) Based on recharging an 80 cubic foot tank from 500 to 3000 psig.
2) Compressor capacity referenced to standard inlet conditions.

E1= Single phase electric, 230 VAC/60 Hz
E3=Three phase electric, 208 VAC/60 Hz