Showing 1–36 of 82 results

Show sidebar
Show All
Close

IAQPoint2

Put money in your pocket and fresh air comfort in your building by using demand-controlled ventilation and triple monitoring. High levels of CO2 can cause drowsiness and create an inefficient work environment for building occupants.
Close

SQN8x

The new generation of the SQN8x series combines long proven sensing capabilities with state-of-the-art pumping technology to yield a highly reliable sample draw gas detection system. The SQN8x offers accurate monitoring of the presence of a wide variety of refrigerants or other toxic and explosive gases in a surveillance area of up to 8 different zones.
Close

420I

Communicates digitally with Vulcain transmitters within a true daisy chain network, converting the digital signals to analog outputs. The 420I communicates digitally with Vulcain transmitters within a true daisy chain network, converting the transmitters’ digital signals to analog outputs.
Close

HA20 Digital Gas Controller

2-channel gas detection system with configurable control, flexible application and user-friendly operation. The HA20 digital gas controller provides simultaneous display and alarm functions for two sensor transmitters, along with user-friendly operation and configuration flexibility.
Close

301R Relay Module

Acts as an output to the 301C, the Relay Module provides 8 DPDT relays for the indirect activation of fans, louvers, etc. at programmable alarm levels. The 301R and 301RW act as an output for the 201C or the 301C. The 301R and the 301RW provide a standard 8 relays (DPDT 5A, 30 Vdc or 250 Vac resistive load) for the indirect activation of accessories.
Close

301AP Annunciator Panel

Remote annunciator provides an efficient interface between gas transmitters and external alarming. The 301AP is the latest generation of remote annunciator panels, incorporating all (previously existing) functionalities, such as the easy to read visual indicators, multiple alarm level displays and fault alarms.
Close

HALO LED Junction Box

HALO is an ATEX/IECEx certified EX e junction box for use with Searchpoint Optima Plus, providing a local visual status indication at a glance The HALO Junction Box enhances the Searchpoint Optima Plus point infrared Hydrocarbon gas detector* by providing a local display showing the sensor status at a glance, even from a distance.
Close

IQ Management System

You call the shots by getting the data you want with the IQ Management System. IQ Management System provides you with the data you want and can use rather than slowing you down with excess information you don’t need. IQ Management System allows you to configure and customize reports and analyses for your needs rather than conforming to a “one size fits all” model.
Close

FAAST Aspirating Early Warning Fire Detector

Protect mission-critical resources by catching a fire before combustion occurs—before there’s even traces of smoke. FAAST (Fire Alarm Aspiration Sensing Technology) provides extremely sensitive and accurate Very Early Warning detection and alarm, which gives facility managers precious time to take appropriate action to maintain business continuity before disaster strikes.
Close

Chemcassette Toxic Gas Detection

Combines ppm/ppb sensitivity with interference free response and physical evidence. Chemcassette® is the unique trademarked name for a calibration free toxic gas detection method that uses an optical scanning system to detect the presence of gas by a color change on the specially chemically impregnated paper tape.
Close

Manning GM-JR

Innovative, standalone readout/alarm unit that can be configured in a variety of ways to solve many refrigeration-gas concentration and alarm needs.
Close

ConneXt Loneworker

ConneXt Loneworker makes it easy to track the location and safety status of your workers in real-time, so you can protect your business and your people, ensuring they make it home at the end of their shift. Honeywell’s unique solutions combine wirelessly enabled gas detection and sophisticated cloud based software, reliably keeping safety managers and lone workers connected all the time via cellular or satellite networks. Safety managers have real-time visibility to location, detector status, and, if applicable, vehicle telematics. You can also receive man-down alerts, communicate with two-way text messages on the gas detector and more.
Close

ConneXt Pro

ConneXt Pro, an enterprise solution for gas detection, harnesses the Internet of Things (IoT) to give you real-time insights on gas threats. So you can know what’s happening, in the second it’s happening, and where it’s happening — and act on it with speed and precision.
Close

ConneXt Plus

In this configurable, self-contained solution, real-time detector readings are sent to remote monitoring software viewable on a computer or mobile device. So whether you’re providing an extra layer of security for equipment technicians or maintaining real-time situational awareness for firefighters, ConneXt Plus gives you centralized command and control. And ConneXt Plus is a portable wireless infrastructure, so you can reposition it from one project to the next.
Close

IR-148

Infrared gas monitor that detects toxic and combustible gases and solvents. The Model IR-148 is an infrared gas monitor that detects toxic and combustible gases as well as solvents. It uses infrared sensing technology, allowing accurate measurement of target gas vapors with minimum interference from other vapors.
Close

Vertex M

Provides a flexible 8 to 24 points of monitoring using colorimetric Chemcasstte®, the industry’s most reliable gas monitoring technology. Vertex M™ is an economical way to install, augment or upgrade a gas monitoring system for industries using toxic.
Close

MeshGuard Stainless Steel

MeshGuard Stainless Steel is a networkable wireless gas monitoring solution designed for quick deployment in areas where low cost/high ROI solutions are required. MeshGuard is available with field-replaceable precision sensors specifically designed to sense toxic and flammable gases.
Close

Posi3 USB

The industry’s leading NFPA-compliant SCBA test bench now has USB communication capability. The PosiChek family of SCBA test equipment has been the industry standard for thousands of fire departments, refineries, chemical plants and nuclear power stations worldwide since it was first introduced in 1988.
Close

Honeywell BW™ Icon

Honeywell BW™ Icon is a fixed-life, 2-year, 4-gas detector for the gas hazards that workers face most often. That means you can turn it on and activate two years of protection, with no need for sensor or battery replacement — and no hidden costs.
Close

ToxiPro® Single Gas Detector

The ToxiPro® reusable, single gas detector is an integral part of the IQ Management System that gives you complete control.
Close

GasAlert Extreme

Designed with durability and comfort in mind, this gas detector monitors for any single gas hazard within its wide range of available toxic gas models.
Close

BW™ Flex

Whether you’re protecting workers or first responders — in industries from steel and wastewater to paper and pulp — Honeywell BW™ Flex delivers the flexibility you need. Choose from more than 15 sensors to simultaneously detect up to 4 gas hazards.
Close

Colorimetric Gas Detection Tubes and Pump

Affordable measurement for specific gases and vapors Perform quick, on-the-spot measurement of specific toxic and combustible substances with this traditional, low-cost solution. The hand pump features a spring-less piston to accurately draw 50 and 100cc samples. The single-use colorimetric gas detection tubes change color in direct correlation to the concentration of gas present.
Close

Radiant Reader

Use a PC to monitor and control wireless detectors in real time Turn any laptop or desktop PC into a wireless controller for MeshGuard or portable monitors. Using either an RS 232 serial or Ethernet port, the Radiant Reader transmits wireless sensor data to a PC running ProRAE Guardian software.
Close

EchoView Host

Real-time remote access to multiple portable gas monitor readings This mini-controller functions as the center for a mobile wireless network of RAE Systems portable gas monitors to increase awareness, improve decision-making, and speed up incident response. The EchoView Host can receive communications from up to eight monitors and display their call names, readings, and alarm status in real time on an easy-to-read screen.
Close

BioHarness

This lightweight, wearable monitor measures personal vital statistics such as heart rate, body temperature, breathing rate, and posture. The BioHarness attaches around the chest, is easy to put on and set up, and doesn’t hinder movement.
Close

MiniRAE Lite +

This affordable hand-held monitor for VOCs provides superior reliability for leak detection and environmental cleanup and remediation. With a photoionization detector that measures from 0-5,000 ppm, a built-in flashlight, and a rugged housing designed for harsh environments, it’s perfect for a range of applications and approved for safe area use in North America.
Close

RAELink 3

Portable wireless router with GPS for RAE Systems and select third-party monitors The RAELink3 wireless transmitter enables a central ProRAE Guardian base station to view sensor and alarm data from RAE Systems portable monitors and select third-party devices for improved situational awareness and faster incident response.
Close

MiniRAE 3000 +

The most advanced wireless handheld VOC monitor with parts per million measurement Whether for industrial hygiene, leak detection, or HazMat response, the MiniRAE 3000 + delivers one of the most advanced VOC monitoring capabilities on the market. With a photoionization detector (PID) that has an extended detection range from 0-15,000 ppm, a rapid three-second response time, built-in correction factors for more than 200 compounds, patented auto-cleaning sensor technology and Reflex PID Technology™, the MiniRAE 3000 + can measure one of the highest levels of ionizable chemicals available on the market.
Close

ppbRAE 3000 +

The most advanced wireless handheld VOC monitor with parts per billion measurement The ppbRAE 3000+ is a best-of-breed monitor trusted by many of the world’s leaders in CBRNE, HazMat Response, Civil Defense, Oil & Gas, and other hazardous environments. Using a 3rd generation photoionization detector (PID) and built-in correction factors for more than 200 compounds, the ppbRAE 3000+ is one of the most advanced VOC monitors for parts-per-billion (ppb) detection.
Close

UltraRAE 3000 +

The most advanced wireless handheld VOC monitor with parts per million measurement Whether for industrial hygiene, leak detection, or HazMat response, the MiniRAE 3000 + delivers one of the most advanced VOC monitoring capabilities on the market. With a photoionization detector (PID) that has an extended detection range from 0-15,000 ppm, a rapid three-second response time, built-in correction factors for more than 200 compounds, patented auto-cleaning sensor technology and Reflex PID Technology™, the MiniRAE 3000 + can measure one of the highest levels of ionizable chemicals available on the market.
Close

Calibration Gases

Ensure maximum accuracy with your RAE monitors through effective and efficient calibration with our calibration gases. Stand-alone gas cylinders range in size from 11 liters to 103 liters, and convenient multi-gas mixtures enable calibration of multiple gases at once, including common mixtures such as carbon monoxide, hydrogen sulfide, and combustibles for LEL sensor calibration.
Close

MultiRAE Lite Pumped

This multi-gas monitor provides versatile, customizable detection and monitoring of up to six gases, available in both pumped and diffused air models. With more than 25 sensors to choose from — the broadest selection in its class — it can test for VOCs, combustibles, and a range of toxic threats, as well as monitor sufficient oxygen levels, making it an excellent choice for personal protection and leak detection in a range of industries and applications.
Close

AutoRAE 2

Simplify bump testing and calibration of your RAE Systems gas monitors with the AutoRAE 2. Versatile and modular, it can be deployed as a single, stand-alone unit to calibrate one instrument at a time, or networked to support up to 10 units at once and calibrate for up to five distinct gases.
Close

MicroDock II Dock Calibration System

The most cost effective way to manage the calibration and bump testing of Honeywell Analytics portable gas detectors is through the MicroDock II automated test and calibration system. Fully portable and easily expandable, the MicroDock II requires no computer and provides simultaneous management of up to six modules.
Close

MicroRAE

Enhanced user-friendliness and flexibility for wireless gas detection The MicroRAE™ is a wireless multi-gas diffusion monitor that simultaneously measures up to four gases, including hydrogen sulfide, carbon monoxide, oxygen and combustibles (LEL).