Showing all 7 results

Show sidebar
Show All
Point & Shoot System
Close

Point & Shoot – Rim Seal Protection

The Williams Point & Shoot System includes both an air aspirating foam device designed to be installed on flammable liquid storage tanks for protection against a seal fire, as well as an optional fixed pipe to be used with a monitor and nozzle.
LW9/WSDB Foam Maker with Wind Shield/Discharge Board
Close

LW9/WSDB Foam Maker with Wind Shield/Discharge Board

The LW9/WSDB Foam Makers are integrated systems providing NFPA 11 “Type II” foam application to the rim seal area of open floating roof tanks.  It allows installation without taking the tank out of service.
LW Series Foam Chambers
Close

LW Series Foam Chambers

Williams Fire & Hazard Control LW Series Foam Chambers consist of a foam expansion chamber and an integral foam maker, defined by NFPA 11 as “Type II” top-side application device.  The foam chamber is installed inside a flammable liquid storage tank above the product’s highest liquid level.
LW Series Dual-Agent Foam Chamber
Close

LW Series Dual-Agent Foam Chamber

The Dual-Agent Foam Chamber from Williams Fire & Hazard Control is a direct response to a challenge discovered in the field mitigating fires in internal floating roof tanks.  It is one tool that addresses both threats occurring during an internal floating roof tank fire — the surface fire (fuel-in-depth), and the potential vapor air explosion due to residual flammable vapor above the pan.
HOLLOW POINT
Close

HOLLOW POINT

The Hollow Point from Williams Fire & Hazard Control is an air aspirating foam discharging device designed to protect against a fully involved surface fire for cone roof or fixed roof storage tanks.
Foam Wand
Close

Foam Wand

The Foam Wand is designed to expand and deliver foam into remote/hazardous areas where either logistics or safety considerations dictate that the foam nozzle be “unattended.” The foam wand delivers high quality foam onto hard-to-access flammable liquid fires.
AMBUSH SYSTEM
Close

AMBUSH SYSTEM

The AMBUSH™ System is an air aspirating foam device designed to provide effective “system based” full-surface as well as rim seal fire suppression for external floating roof storage tanks.  It is another cutting edge innovation from Williams Fire & Hazard Control.