PRO-FLOW HP – High Pressure Large Diameter Hose – SOS Safety International Inc.

PRO-FLOW HP – High Pressure Large Diameter Hose

///PRO-FLOW HP – High Pressure Large Diameter Hose

PRO-FLOW HP – High Pressure Large Diameter Hose

A high pressure, high visibility, large diameter supply hose that delivers attack line flow of 300 psi. Heat and chemical resistant, the nitrile/PVC through-the-weave
design allows the hose to expand under pressure —decreasing friction loss and increasing water flow. The thin rib rubber outer cover offers increased resistance to impact, punctures and abrasion. Reliable, maintenance-free and requires no drying, make this the ideal supply hose for busy municipal fire departments. NFPA compliant and UL listed.

Colors: Hi-Visibility Green


Abrasion Resistance
Hose shall withstand 10,000 cycles on the Taber Abrasion Machine (H-22 Wheel: 0.5 kg), without exposing the liner. Key Hose, on request, will supply written warranties that Pro-Flow HP hose meets a minimum 10,000 cycles. Other abrasion test results (UL, DIN, etc.) can be supplied on request of purchaser.

Cold Resistance
Hose shall have a capability of use down to -35 °F. Hose shall have no apparent damage to cover, reinforcement or lining when subjected to the following cold flexibility test: a 50′ length of dry hose is to be firmly coiled and placed in a cold box at -35 °F for a duration of 24 hours. Immediately after removal of the hose from the box, hose should be uncoiled and laid out by one operator.

Ozone Resistance
Hose shall show no visible signs of cracking to the lining or cover when tested in accordance to ASTM D518 Procedure B (100 pphm / 118 °F / 70 hours).

Chemical Resistance
Exposure to sea water and contamination by most chemical substances, hydrocarbons, oils, alkalis, acids and greases must have no effect on the short or long term performance of the hose. A chemical resistance chart is available and Key Hose will supply specific chemical resistance data on request of purchaser for unique applications.

Heat Resistance
The hose, when subjected to a static pressure of 100 psi, shall be capable of withstanding a surface temperature of 1200 °F for a minimum of one minute without rupture or damage to the synthetic reinforcement.

As required by purchaser, expansion ring threaded, Storz clamp ring, etc

Hose Construction
Hose shall be made from 100% high tenacity synthetic polyester yarn, circularly woven and completely protected by a through-the-weave extruded PVC/Nitrile rubber, forming a single homogeneous construction without the use of glues or adhesives of any type. Pro-Flow HP features a thin rib construction to aid abrasion resistance. Pro-Flow HP meets or exceeds requirements of NFPA 1961. Pro-Flow HP shall carry a 10-year written warranty against defects in materials and workmanship. Lengths available up to 100′.

Lining Properties
Ultimate Tensile Strength – Tensile strength of the lining and cover shall not be less than 1200 psi.

Ultimate Elongation – 400% minimum.

Accelerated Aging Test – The tensile strength and ultimate elongation of the vulcanized rubber compound which has been subjected to the action of oxygen at a pressure of 300 psi (±10 psi) and a temperature of 158 °F (±18 °F) for a period of 96 hours shall retain 60% of its originally stated properties



There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.